Effect of stress history on CPT and DMT results in sand     

Moon-Joo Lee  Sung-Kun Choi  Min-Tae Kim  Woojin Lee 《Engineering Geology》2011,117(3-4):259-265

In order to investigate the effect of stress history on in-situ test results in granular sediments, a series of CPTs and DMTs are performed on Busan sand prepared in the calibration chamber. K_D is found to be the most sensitive to the stress history among CPT and DMT measurements. E_D and q_c are observed to be similarly affected by the stress history and, therefore, the E_D–q_c relation appears to be almost independent of the stress history. The K_D–D_R relation established without considering the stress history is likely to overestimate the relative density of OC sand. It is shown that the existence of the pre-stress of the granular sediment can be indirectly recognized by an estimation of the relative density larger than 100% when using the K_D–σ_v′–D_R relation suggested for NC sand. Although q_c/σ_v′–K_D/K₀ and E_D/σ_v′–K_D/K₀ relations are heavily influenced by the stress history, q_c/σ_m′–K_D/K₀ and E_D/σ_m′–K_D/K₀ relations are observed to be independent of the stress history. Based on these relations, charts to evaluate the K₀ value from q_c and/or DMT indices are developed for both NC and OC sands. The design chart based on E_D/σ_m′–K_D/K₀ and E_D/σ_v′–K_D/K₀ relations is expected to be practically useful as the usage of this chart requires only DMT indices. The developed design charts are applicable to Busan sand but different sets of equations and charts may be developed for other sands.  相似文献   

A biogeochemical orientation survey in the Moisan gold-mineralized area, Haenam district in Korea     

Ji-Eun Jung  Jong-Nam Kim  Hyo-Taek Chon 《Journal of Geochemical Exploration》2011,111(3):152-159

A biogeochemical orientation survey was carried out in the vicinity of an epithermal Au deposit in the Moisan Au–Ag mineralized area, Haenam district in Korea. The Au–Ag bearing quartz veins of the mine occur as narrow open-space fillings within Cretaceous silicic pyroclastics. The vein minerals consist mainly of quartz, sericite, pyrite, chalcopyrite, and galena, with some electrum and argentite. The main objectives of this study were to study the geochemical characteristics of rocks, soils and plants in this area, to investigate the spatial relationship between Au and associated elements in rock–soil–plant system, and to evaluate the applicability of biogeochemical prospecting for Au vein occurrences in Korea. Samples of rocks and soils, and leaves of three plant species (Japanese red pine — P. densiflora, oriental white oak — Q. aliena, Japanese mallotus — M. japonicus) were collected from the target mineralized area and control barren locations, and analyzed for trace elements by instrumental neutron activation analysis. Sampling lines were composed of one slope line which is almost parallel to the mineralized quartz-veins, and four transect lines spaced 100 m apart across the veins at 20 m sampling intervals. From the multi-element data of rock samples (n = 9), high values of Au (maximum 2030 ppb) are spatially related to Au–quartz veins. Soil samples (n = 61) collected from five sampling lines show higher values of Au (24–825 ppb) whereas soil samples from the control locations have lower values of Au (below 25 ppb). Many plant species collected from the vicinity of the veins have high Au contents compared with those at the control locations, but the ranges of Au values are variable among plant species. In a total of 128 samples of plant leaves, Q. aliena yielded Au values of 0.4 to 6.9 ppb, and M. japonicus 0.9 to 4.1 ppb. Gold contents in P. densiflora ranged from 0.1 to 5.6 ppb. Plant leaves from control areas show less than 1.6 ppb Au. The biological absorption coefficient (BAC) of Au in plants decreases in the order of Q. aliena > M. japonicus > P. densiflora. Based on the results of the study, Q. aliena appeared to be the best sampling media for biogeochemical prospecting of Au in the study area.  相似文献   

A DEM-based evaluation of potential flood risk to enhance decision support system for safe evacuation   总被引：2，自引：1，他引：1  

Jinyoung Kim  Yuji Kuwahara  Manish Kumar 《Natural Hazards》2011,59(3):1561-1572

A practical, DEM-based practical method is proposed to enhance flood risk management in fluvial areas by quantifying relative risk as a function of vulnerability to inland and evacuation difficulty. Both measures are based mainly on the topography of the region, so the method does not require detailed data on the physical characteristics of the land. First, we use the deterministic 8-node method on a digital elevation map (DEM) to trace storm waterways. Second, we repeat the process on a reversed DEM to trace evacuation routes that avoid the waterways and zones dangerously close to the rivers. Finally, on the basis of such two flow lines of evacuee and storm water, we proposed the protocol to evaluate the flood risk at every point on the map taking into account both the minimum time required for floodwater to arrive and duration of an evacuation from that location. The time that must be allocated for safe evacuation is defined as the potential flood risk of evacuation (PFRE). The method is demonstrated on a fluvial area of the Kaki River in Nagaoka city, Japan. In addition, we illustrated the application of the PFRE map to divide the region into areas of greater or lesser evacuation urgency.  相似文献   

Thermotomographic model and oil-and-gas forecasting for the sedimentary cover of the Laptev Sea shelf     

M. D. Khutorskoi  L. V. Podgornykh  O. I. Suprunenko  B. I. Kim  A. A. Chernykh 《Doklady Earth Sciences》2011,440(2):1381-1386

2D and 3D geotemperature models of the sedimentary cover within the Laptev Sea shelf have been calculated. The presence of several “thermal domes” (zones of uplifted isotherms) has been found. Based on analogous sedimentary basins with domes, which correlate to the location of hydrocarbon deposits, the forecasting has been made that the Ust-Lena graben and Omoloi trough are the most promising areas for oil-and-gas prospecting.  相似文献   

Evidence for significant clockwise rotations of the Korean Peninsula during Cretaceous   总被引：1，自引：0，他引：1  

Youn Soo Lee  Hyun-Chul Han  Jae Ha Hwang  Weon-Seo Kee  Bok Chul Kim 《Gondwana Research》2011,20(4):904-918

In an effort to evaluate the Cretaceous magnetostratigraphy for the Korean Peninsula and to establish the tectonic coherence of its various elements, we collected paleomagnetic data from 121 samples from 20 sites within the Chilgok Formation (108.3–109.9 Ma) in the Gyeongsang Basin. Together with previously published data, we evaluate the results from a total of 163 sites in the basin.We combine our age model with results from recent stratigraphic, paleomagnetic and radiometric geochemical studies. In this study, we found that two distinct declination shifts decrease with younging direction, indicating two clockwise rotational events of the Korean Peninsula with respect to the Eurasia continent. The earlier event took place during 130–100 Ma (Phase I, newly termed “Goguryeo Disturbance”) and a later one during 80–50 Ma (Phase III, belonging to “Bulguksa Orogeny”). The mean rotation rate in the interval from 115.2 to 103.8 Ma (Phase I) is about 0.74°/Ma, while the rate from 90.9 to 79.8 Ma (Phase II) is 0.19°/Ma. Based on paleolatitude change during Phase I, we infer that the Korean Peninsula (eastern part of the Sino-Korea Block) migrated southward about 300 km after the complete amalgamation of the Sino-Korea Block into the Eurasian continent resulting in N–S compression within the Korean peninsula and Manchuria. Large-scale strike-slip faults (e.g., Tan-Lu Fault, Okcheon Boundary Fault) were probably rejuvenated in the Sino-Korea Block during Phase I.  相似文献   

Investigation of CO₂ behavior and study on design of optimal injection into Gorae-V aquifer     

W. M. Sung  Y. S. Lee  K. H. Kim  Y. H. Jang  J. H. Lee  I. H. Yoo 《Environmental Earth Sciences》2011,64(7):1815-1821

This study presents the Bottom-hole pressure (BHP) behavior with different wettabilities and the optimal design scheme to effectively inject CO₂ into the Gorae-V aquifer. As a result, the injection rate and injectivity were increased as the wettability condition became more water-wet. However, the more wettability condition becomes water-wet, the more the ultimate CO₂ injection volume decreases. When the injectivity was 346 ton/day/Mpa at the Gorae-V aquifer, the aquifer can sustain CO₂ injection at a rate of 2,425 tons per day over this time period. A design for a complete CCS system was developed based on the existing off-shore pipeline in combination with new on-shore CO₂ transport infrastructure, and a pressure of 12.8 MPa is required at the CO₂ source to maintain this injection rate.  相似文献   

Hydrogen peroxide interference in chemical oxygen demand during ozone based advanced oxidation of anaerobically digested livestock wastewater   总被引：1，自引：1，他引：0  

E. Lee M.Sc  H. Lee M.Sc.  Y. K. Kim Ph.D.  K. Sohn M.Sc.  K. Lee Ph.D. 《International Journal of Environmental Science and Technology》2011,8(2):381-388

It is known that hydrogen peroxide interferes with chemical oxygen demand analysis by consuming oxidation agents such as potassium dichromate, thus leading to overestimation of the chemical oxygen demand measurements. The objective of the study was to investigate the effects of hydrogen peroxide interference and to determine true chemical oxygen demand values on interpreting treatment performance during ozone-based advanced oxidation of livestock wastewater in which hydrogen peroxide concentration and chemical oxygen demand values are dynamically changing. According to the chemical oxygen demand monitoring data, chemical oxygen demand values were always higher than the initial chemical oxygen demand load when hydrogen peroxide was involved and the treatment performance with ozone alone or ozone/ultraviolet was better than with coupled hydrogen peroxide. The extent of overestimation was proportional to the remaining hydrogen peroxide concentration and the average overestimation ratio in livestock wastewater was in the range of 0.50～0.58 mg per 1 mg of hydrogen peroxide, depending upon the quality of the wastewater treated. True chemical oxygen demand values were estimated by correlating the extent of overestimation with the remaining hydrogen peroxide concentration during treatment. The extent of overestimation decreased to zero gradually as the amount of hydrogen peroxide also approached zero as oxidation proceeded. The corrected chemical oxygen demand values indicated underlying tendency of oxidation, which could not be seen in the original chemical oxygen demand monitoring data. Application of ozone/hydrogen peroxide was more efficient for reducing chemical oxygen demand than ozone alone, as was ozone/hydrogen peroxide/ultraviolet compared to ozone/ultraviolet. When coupled with ozone, ultraviolet irradiation was more efficient than hydrogen peroxide for decreasing chemical oxygen demand during treatment of livestock wastewater.  相似文献   

Numerical analysis and validation of weakly nonlinear ship motions and structural loads on a modern containership     

Myung-Jae Song  Kyong-Hwan Kim 《Ocean Engineering》2011,38(1):77-87

This paper aims to validate a numerical seakeeping code based on a 3D Rankine panel method by comparing its results with experimental data. Particularly, the motion response and hull-girder loads on a real modern ship, a 6500 TEU containership, are considered in this validation study. The method of solution is a 3D Rankine panel method which adopts B-spline basis function in the time domain. The numerical code is based on the weakly nonlinear scheme which considers nonlinear Froude-Krylov and restoring forces. The main focus of this study is given to investigate the nonlinear characteristics of wave-induced loads, and to validate this present scheme for industrial use in the range of low Froude number. The comparisons show that the nonlinear motions and hull-girder loads, computed by the present numerical code, have good overall agreements with experimental results. It is found that, for the better accuracy of computational results, particularly at extreme waves in oblique seas, the careful treatment of soft-spring (or compatible) system is recommended to the control of non-restoring motions such as surge, sway, and yaw.  相似文献   

Test method of cavitation erosion for marine coatings with low hardness     

Bu-Geun Paik  Ki-Sup Kim  Jong-Woo Ahn  Kyung-Rae Kim  Sang-Uk Lee 《Ocean Engineering》2011,38(13):1495-1502

Rudders of large container ships are easily affected by cavitation, which is well known to be induced by significant axial flows behind a propeller and discontinuities in the rudder. Among several methods to prevent or reduce the cavitation erosion occurred in the rudder, painting is gaining a lot of attention because it can be employed easily and cheaply. To conduct erosion tests properly, the simulation of heavily erosive cavitation is necessary. This can be generated using an inclined propeller dynamometer in the medium-size cavitation tunnel of MOERI (Maritime & Ocean Engineering Research Institute). The inclined shaft of the propeller creates strong cavitation, which occurs around the root of the propeller blade. This cavitation creates impacts through the collapsing process that are very severe, and are useful for realistic and efficient cavitation erosion tests. In the present study, the newly developed cavitation erosion test method is successfully employed to evaluate marine coatings that is mainly composed of epoxy elastomer or silicone polymer material. Silicone polymer-type paint B was found to have three times larger endurance than epoxy elastomer-type paint A.  相似文献   

Evidence of gas hydrate from downhole logging data in the Ulleung Basin, East Sea   总被引：3，自引：0，他引：3  

Gil Young Kim  Bo Yeon Yi  Dong Geun Yoo  Byong Jae Ryu  Michael Riedel 《Marine and Petroleum Geology》2011,28(10):1979-1985

The Gas Hydrate Research and Development Organization (GHDO) of Korea successfully accomplished both coring (hydraulic piston and pressure coring) and logging (logging-while-drilling, LWD, and wireline logging) to investigate the presence of gas hydrate during the first deep drilling expedition in the Ulleung Basin, East Sea of Korea (referred to as UBGH1) in 2007. The LWD data from two sites (UBGH1-9, UBGH1-10) showed elevated electrical resistivity (>80 Ω-m) and P-wave velocity (>2000 m/s) values indicating the presence of gas hydrate. During the coring period, the richest gas hydrate accumulation was discovered at these intervals. Based on log data, the occurrence of gas hydrate is primarily controlled by the presence of fractures. The gas hydrate saturation calculated using Archie’s relation shows greater than 60% (as high as ∼90%) of the pore space, although Archie’s equation typically overestimates gas hydrate saturation in near-vertical fractures. The saturation of gas hydrate is also estimated using the modified Biot-Gassmann theory (BGTL) by Lee and Collett (2006). The saturation values estimated rom BGTL are much lower than those calculated from Archie’s equation. Based on log data, the hydrate-bearing sediment section is approximately 70 m (UBGH1-9) to 130 m (UBGH1-10) in thickness at these two sites. This was further directly confirmed by the recovery of gas hydrate samples and pore water freshening collected from deep drilling core during the expedition. LWD data also strongly support the interpretation of the seismic gas hydrate indicators (e.g., vent or chimney structures and bottom-simulating reflectors), which imply the probability of widespread gas hydrate presence in the Ulleung Basin.  相似文献